Frame sliders torque
5 posts
• Page 1 of 1
Frame sliders torque
Could somebody tell me what torque should I use installing frame sliders on my 07 S4R ?
07 monster S4R, if you're not riding, you're wasting time
-
kvido7 - Posts: 68
- Joined: Mon Oct 16, 2006 12:15 pm
- Location: Bedford, NS
Torque
Joe what size are the bolts? I can give you a standard torque spec for size, would also like to know the thread pitch.
If you find me on the side of the road, pick me up and put me back on my bike.
02 998S Bayliss (Stolen)
03 Valkyrie
07 1098
10 Streetfighter S
02 998S Bayliss (Stolen)
03 Valkyrie
07 1098
10 Streetfighter S
-
Sailor - Posts: 40
- Joined: Fri Sep 14, 2007 9:40 pm
- Location: Halifax, NS
Hmmm...I am not familiar with monsters but are these replacing the motor mount bolt to the frame ?
If they are....I would not recommend any other torque than the OEM motor mount bolt torque speced in the shop manual. For 748/996/998 superbikes it is 45 ft/lbs or 60 N.M. I am not sure if it is the same for monsters.
If they are....I would not recommend any other torque than the OEM motor mount bolt torque speced in the shop manual. For 748/996/998 superbikes it is 45 ft/lbs or 60 N.M. I am not sure if it is the same for monsters.
#953
- Angus
- Posts: 49
- Joined: Tue May 17, 2005 1:48 pm
- Location: Ottawa
Was that spec "snug it up to where you think it should be, then add 10ftlbs", or do that, then subtract 10ftlbs?
Bike borrower extraordinaire!
- Rocket Rick
- Posts: 594
- Joined: Fri Dec 17, 2004 11:50 am
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests