Hey I bought an integrated tail light from d2moto but it came with no wiring diagram or instructions. The tail light itself has a yellow and blue lead for the signals and it also came with two resistors (I assume for the blinking portion) and those have white leads. The stock signal light leads that go into plastic connector are both black. From that connection into the wiring harness there is one dark and one white with a dark stripe. I was going to assume that I splice the resistor with white leads inbetween the white with dark stripe wires going to each signal set into the harness. I dont wanna blow the resistor if I hook it up wrong, so if anyone has this type of integrated tail light, or knows the harness well enough with my shifty description and can lend a hand I would appreciate it. I got my evotech tonight and I'm anxious to put it all together.

Have you tried asking the manufacturer? THey may have the instructions on their website.

The Goochman

I have Gooch, their website has f all and they havent responded to my email. Shitty customer service so I won't be buying from them again. It was D2moto FYI. I can assume that the resistor should be off the hot leg for the blinking portion and the other for the ground. I haven't had any luck here so I'll give er a try and if I blow up the resistor I guess I'll stick on the stock signals.

It was a good suggestion, even if it didn't work out. Sorry I can't help you any more than that.

Dave G

Np Gooch, I gave er a shot on my own tonite and got the integrated tail light and the evotech bracket installed and it looks mint!! I'm gonna do my own mod to the evo bracket and get the plate further behind the tail light. Thanks anyway, it looks great and I'm happy!