998s FE Over heating
2 posts
• Page 1 of 1
998s FE Over heating
I noticed last night on my 2004 998s FE the cooling fans have quit working. It over heated last night while I was stuck in traffic.
After I got home, I figured out the fans are no longer working. I checked the fuse and it looks ok. I am going to replace it anyway. This spring I had the Water Sensor Unit replaced because it was seeping. The fans were working fine until last night.
Any help would be appreciated.
After I got home, I figured out the fans are no longer working. I checked the fuse and it looks ok. I am going to replace it anyway. This spring I had the Water Sensor Unit replaced because it was seeping. The fans were working fine until last night.
Any help would be appreciated.
- Ducman998
- Posts: 2
- Joined: Sat Mar 14, 2009 7:09 pm
- Location: Saskatoon
Re: 998s FE Over heating
Sounds like a bad connection someplace. Unplug each fan and see if they will run from an external 12V source. If you have a meter check to see if you have continuity in the connections. Sometimes the connectors will corrode and require cleaning. The fuses are also suspect. They can fracture and you have a hard time seeing the break. I had a fuse go on a 900SS and it looked fine but it was cracked. A meter can help here too. Sometimes the fuse will work when it is cold but as it heats up the connection opens and no juice.
Hope this helps
Hope this helps
- Rob374
- Posts: 86
- Joined: Wed Dec 22, 2004 9:29 am
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 17 guests