Ducati Owners Club Of Canada
Official Bikes of the DOCC Thread
Page 1 of 6
Official Bikes of the DOCC Thread

Since the DOCC doesn't have a thread with pics and descriptions of member bikes, I'm starting one. Post a pic or two of your bikes along with a description of mods, etc and anything else that other members may find interesting. The bikes don't have to be Ducatis.... just make sure they're yours!
Here are mine....
2000 M966Sie (the 916 belongs to my friend Jason from Montreal, aka "Desmoquattro" here on the DOCC).
I bought my Monster used in 2004 as a stock 2000 M900Sie w/3k miles on the clock. Since then it's been an ongoing project:
MBP Ducati 900ie->966ie motor build (98RwHP), reflashed ECU, tuned Powercommander 3 USB, K&N air filter, FbyF airbox cover, 15/42T sprockets, BST CF wheels, Michelin Pilot powers, ceramic coated headers, DP carbon low ovals w/ dB killers, Barnett clutch pack and aluminum basket, CRG levers and LS mirrors, CC clipons, Evoluzione slave, Cyclecat pressure plate and clutch cover, Showa adj forks w/Ohlins internals, Ohlins rear shock and side damper, CC sliders, Sargent seat, Rizoma biposto rearsets, Dualstar heated grips, DP bellypan, Shifttech carbon stuff, 1/2 tail chop, Galfer and ABM wave rotors, probably some other stuff i'm forgetting. Now nearing 20k miles so it gets ridden.
2007 ST3s ABS
The 2007 ST3s was a recent purchase (August '07). I bought it because my girlfriend was showing a real interest in riding pillion (although she'll be taking the MSF course in the spring thanks to Santa
) and the Monster wasn't much good for rides of more than 1 hour. This pic was taken on the Cabot Trail in September. The ST3s will remain pretty much stock except for a set of DP pipes, heated grips, and maybe a taller windscreen.
So those are mine. Let's see yours!

Here are mine....
2000 M966Sie (the 916 belongs to my friend Jason from Montreal, aka "Desmoquattro" here on the DOCC).

I bought my Monster used in 2004 as a stock 2000 M900Sie w/3k miles on the clock. Since then it's been an ongoing project:
MBP Ducati 900ie->966ie motor build (98RwHP), reflashed ECU, tuned Powercommander 3 USB, K&N air filter, FbyF airbox cover, 15/42T sprockets, BST CF wheels, Michelin Pilot powers, ceramic coated headers, DP carbon low ovals w/ dB killers, Barnett clutch pack and aluminum basket, CRG levers and LS mirrors, CC clipons, Evoluzione slave, Cyclecat pressure plate and clutch cover, Showa adj forks w/Ohlins internals, Ohlins rear shock and side damper, CC sliders, Sargent seat, Rizoma biposto rearsets, Dualstar heated grips, DP bellypan, Shifttech carbon stuff, 1/2 tail chop, Galfer and ABM wave rotors, probably some other stuff i'm forgetting. Now nearing 20k miles so it gets ridden.
2007 ST3s ABS

The 2007 ST3s was a recent purchase (August '07). I bought it because my girlfriend was showing a real interest in riding pillion (although she'll be taking the MSF course in the spring thanks to Santa

So those are mine. Let's see yours!


Here are my Ducati's..........
His
Her's

His

Her's


His
Her's


Her's


2007 ST3 No mods yet.



Here's my 1996 900SP... I won't post any of the monster at the moment, because it changes every 10 minutes!
R6 Race Bike



R6 Race Bike


This my 996 no major mods yet........
Fun Toy

This is a 998 I bought in Nov, a little bit intimidating but can't wait till spring.


IMG_0505.jpg
- Sweet Ride
- (167.8 KiB) Downloaded 1293 times
IMG_0505.jpg
- Sweet Ride
- (167.8 KiB) Downloaded 1293 times


86 gixxer

77 RD400

06 s2r monster dark


Nothing smells like castor based premix.


Mine,
Mine,
And Mine.


Mine,

And Mine.

My rides...

OK, here are mine (click for larger images).
The red ones are:
'96 M900, work in progress, currently has tail chop, Fren tubo (sp?) oil lines, the red clutch cover, Robby Moto throttle, some carbon stuff and aluminum Termi cannisters (not pictured).
The 916 is a '98 with about 2000km in total - recent purchase on my part, only mods are Vance and Hines exhaust cannisters, DP ECU chip, Corbin seat and FBF air filter, all done by P/O. Might do a full Infostrada or Foggy graphics kit on this one, not sure yet.
S4RS is my newer bike, although it looks like there's a shrubbery growing out of the seat in this photo! Mods limited to Oberon bar end mirrors (not pictured) and removal of the tail end dangling reflector thingy...
The red ones are:
'96 M900, work in progress, currently has tail chop, Fren tubo (sp?) oil lines, the red clutch cover, Robby Moto throttle, some carbon stuff and aluminum Termi cannisters (not pictured).
The 916 is a '98 with about 2000km in total - recent purchase on my part, only mods are Vance and Hines exhaust cannisters, DP ECU chip, Corbin seat and FBF air filter, all done by P/O. Might do a full Infostrada or Foggy graphics kit on this one, not sure yet.
S4RS is my newer bike, although it looks like there's a shrubbery growing out of the seat in this photo! Mods limited to Oberon bar end mirrors (not pictured) and removal of the tail end dangling reflector thingy...

03 RC51...#8, Track
02 998 chassis/ 04 999s mill / 999 front end..
..#54 Track.


02 998 chassis/ 04 999s mill / 999 front end..



My 1974 Ducati 750 Sport. It is a bevel drive springer.


Doh! Did not work.....not as tech savvy as I thought.....

This better?
And your web page.

And your web page.